Description
- Printed in high-resolution resin (16K – super smooth finish, no print lines)
- Direct fit for original mounts using factory hardware (three screws)
- Adds realism and polish
- Designed and printed by pinball enthusiasts
Check out the HD Saucer here: https://pinside.com/pinball/shops/shop/1697-nimr0d-pinball/15781-ez-hd-gtf-saucer
Video: https://youtube.com/shorts/gJI7ugVlSOI
I offer a few versions to fit what you want, my two painted options are a multi-layer process that leaves a highly durable and glossy finish. I also offer this in raw form, straight off the printer, you’ll need to prep, sand, and paint for that custom look.
- Gold Painted
- Silver Metalic
- Unpainted
Instructions:
- Turn game power off, remove glass
- remove screw from post behind the tank holding up the upper plastic ball guide
- remove hex post behind the tank
- remove two screws on the front of the tank
- gently lift upwards on the tank, clear the tank from the robot and vertical movement bar and set to the side.
- remove 2 screws from base of robot securing it to the vertical bar
- remove the one screw holding the SMD board into your origional robot and pull out the SMD board
Install is reverse of disassembly, I’ve found it easier to reinstall the LED SMD board into the robot while it’s plugged into the wiring harness already.
Designed by Top_Fuel_Friday. Licensed for production and sale by Nimr0d Pinball.
Reviews
There are no reviews yet.