Home Products WPC Playfield Mounts for PinStadium LED Light Bars

WPC Playfield Mounts for PinStadium LED Light Bars

$19.95

My Theatre of Magic is very snug with mirror blades installed, and with the magnetic strip attached it would be impossible to lift the playfield up into service position.

I created these front only mounts to solve that problem. I used these mounts to attach the front of the PinStadium LED bar, with a 10 inch section of PinStadium magnetic mount on the rear.

Please check your machine before ordering. You will measure from the top of the siderail on playfield, to the bottom of the glass channel. PM me with questions or if you want a custom height made.

WPC: 76mm

This product is not endorsed, authorized, or sponsored by PinStadium. It is a third-party accessory designed and produced by nimr0d pinball.

WPC Playfield Mounts for PinStadium LED Light Bars quantity

Category: Lighting - Led Tag: pinstadium Game: Attack from Mars, Indiana Jones: The Pinball Adventure, Terminator 2: Judgment Day, The Getaway: High Speed II, Theatre of Magic, White Water

Reviews (0)
Mods
Games
Documentation

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Linked Categories

Lighting - Led

Linked Games

Attack from Mars

Indiana Jones: The Pinball Adventure

Terminator 2: Judgment Day

The Getaway: High Speed II

Theatre of Magic

White Water

Linked Documentations

No Documentations Available

Cust0mer Reviews

What our customers say

Looks so freaking cool Love this

- fnosm

Great mod! I highly recommend this one. As of the date of this review, I think this is the best Death Eater Airball protector available. I had another one but ... Read More

- Jam_Burglar

This is a good mod- looks like the train should had been there from the factory! There are two tracks you can get (if you want to include the passenger ... Read More

- BSoulMan

The Pinboots accentuate the CE nicely... Nice and relatively inexpensive mod!

- BSoulMan

Simple products, easy install, nice peace of mind that doesn’t interfere with ball travel.

- Harvester

Installed the variant with “Death Eater”; built like a tank and going strong after 3 weeks and dozens of games.

- Harvester

Nice product. Fine feet faster seem solid, colors are great, and fit just right

- MinusWorlds

Should have been stock for home use. I get that operators may love a fat left drain to keep game income higher, but nimr0d's left lane fix is the best ... Read More

- Pintermission

Had another protector there before. It broke after a few plays. This one is robust and will probably outlast the pin itself!

- bjorg

Frankly, this is how the game should have looked from the get go. Super easy to install. Just cut the adhesive into small strips. Two screws to undo for the ... Read More

- bjorg

Love it. Looks like it should have been there from the get go. I found it easier to loosen the screws behind the backboard and remove the mirror with its ... Read More

- bjorg

The PinBoots match EXACTLY the color of the golden legs on the CE. It looks amazing! Highly recommended to pair with black leg levelers unless you can find golden ones. ... Read More

- bjorg

Yeah, this is so obvious. It should have been installed at the factory. Don't hesitate to buy! Every machine should have it.

- bjorg

This thing is pretty awesome! Lots of a attention to detail! It is larger than my other pincups, but not much larger. You won't be disappointed!

- DippinMyToeIn

Easy and worthwhile mod. Should have been this way from the factory. A must for any HP pin.

- DippinMyToeIn

fnosm

fnosm Looks so freaking cool Love this

Jam_Burglar

Jam_Burglar Great mod! I highly recommend this one. As of the date of this review, I think this is the best Death Eater Airball protector available. I had another one but it shattered very quickly because brittle plastic just can't take the abuse this area gets. The ABS plastic used on this protector, on the other hand, has held up like a champ. My only suggestion would be to do a third design option: a plain black version without any writing at all.

BSoulMan

BSoulMan This is a good mod- looks like the train should had been there from the factory! There are two tracks you can get (if you want to include the passenger train, you'll need the LONG track). I may end up adding the passenger train as that will extend the mod on the plastic which may help prevent the ball getting stuck in the plastic above the shooter lane etc.

BSoulMan

BSoulMan The Pinboots accentuate the CE nicely... Nice and relatively inexpensive mod!

Harvester

Harvester Simple products, easy install, nice peace of mind that doesn’t interfere with ball travel.

Harvester

Harvester Installed the variant with “Death Eater”; built like a tank and going strong after 3 weeks and dozens of games.

MinusWorlds

MinusWorlds Nice product. Fine feet faster seem solid, colors are great, and fit just right

Pintermission

Pintermission Should have been stock for home use. I get that operators may love a fat left drain to keep game income higher, but nimr0d's left lane fix is the best mod for Star Wars in a home setting. Really helps remove frustration by making the left drain similar to right, especially with a geometry that can randomly autoplunge to the multiplier targets richoceting straight down left outlane without this fix. Order 2: one to install and one to keep as a backup. Thanks so much!

bjorg

bjorg Had another protector there before. It broke after a few plays. This one is robust and will probably outlast the pin itself!

bjorg

bjorg Frankly, this is how the game should have looked from the get go. Super easy to install. Just cut the adhesive into small strips. Two screws to undo for the big ring. That's all there is to it. Super trivial!

bjorg

bjorg Love it. Looks like it should have been there from the get go. I found it easier to loosen the screws behind the backboard and remove the mirror with its bracket. Then replace the mirror and reattach. Took me 15 minutes because I like to be careful. Probably one of the easiest mods to install!

bjorg

bjorg The PinBoots match EXACTLY the color of the golden legs on the CE. It looks amazing! Highly recommended to pair with black leg levelers unless you can find golden ones. A must have for anyone who needs to protect their floors!

bjorg

bjorg Yeah, this is so obvious. It should have been installed at the factory. Don't hesitate to buy! Every machine should have it.

DippinMyToeIn

DippinMyToeIn This thing is pretty awesome! Lots of a attention to detail! It is larger than my other pincups, but not much larger. You won't be disappointed!

DippinMyToeIn

DippinMyToeIn Easy and worthwhile mod. Should have been this way from the factory. A must for any HP pin.